E-light technology is a combination of the advantages of IPL and RF technologies, which makes use of the resistance difference between the target tissue and normal skin resulted from selective absorption effect of the skin to photon energy. The energy of Radio Frequency can reach the middle and deep layer of the skin and heat up tissue, thus, lower energy is applied during the IPL treatment. Uncomfortable feeling during the IPL treatment will be decreased significantly and better result can be expected. In addition, cooling system involved in E-light can also ease the uncomfortable feeling.The absorbing of the energy of radio frequency is not concerned with melanin. So, the E-Light treatment can get good result on the soft or thin hair so as to decrease the risk caused by traditional IPL treatment.
1. skin tightening: skin lifting, improve flexibiligy and tone of skin\
2. skin rejuvenation: fine wrinkles, pigments, freckles, vascular lesions(telangiectasis) removal, skin whitening, shrink large hair pores.
3. hair removal : all kinds of skin and color
4. acne removal: improve the situation of oily skin, kill acne bacilli.
1. AG coated Cu-alloy chamber design with high efficiency of light transfer
2. Magnet structure design for easy switch of different filters
3. Better cooling system with sapphire conducting enhancing the skin surface cooling
4. Colorful touch screen system, easy for operation
5. Bigger energy for wide range applications
6. Exquisite RF electrode with better direction and energy penetration.
Filter Spectrum: 430-1200nm/560-1200nm/585-1200nm/640-1200nm;
Filter Material: Sapphire;
Energy Density: 10-70J/cm2;
Pulse Quantity: 1-15;
Pulse Duration: 1-15ms;
Pulse Delay: 1-99ms;
Radio Frequency: 10MHz;
RF Power: 50W;
Spot Size: 8×34mm and 7×15mm;
Handpiece Quantity: 2(with plug-in quick connetor);
Filter Quantity: 4(SR&HR);
Contact Temperature: 0-3?;
Cooling Manner: Closed Cycle Water to Air Heat Exchanger;
Electrical Power: 220VAC, 50Hz/60Hz;
Control System: 8.4" TFT Colourful Touch Screen;